Epson PP 405 Benutzerhandbuch Seite 105

Appendix F EPSON LQ 2550 and ESC/P2 Quick Reference
Table B-4: (Cont.) Vertical Form Handling
Escape Sequence Mnemonic Function
ESC EM P1
ESC [ > P1 ; P2 ; P3 ; P4 s SPSIF
Native Command
ESC [ P1 s SPS
Native Command
ESC [ ; P2 s AGC/PCC Print Gap Control:
Native Command,
see also GP Emulation
*) only PRINTER TYPE 1
**) only PRINTER TYPE 1 and PRINTER TYPE 2
***) only PRINTER TYPE 2 and PRINTER TYPE 3
Form Feed and ASF Control *)
EM = 1/9
P1 = 0/1 or 1: ASF Bin 1
P1 = 0/2 or 2: ASF Bin 2
P1 = 0/3 or 3: ASF Bin 3
P1 = 8/2 or R: (5/2) eject sheet
Select Paper Source and Insert
Form, Print Gap, Paper Exit, Cut-Mode
(any parameter > or P1 to P4 may be
skipped, see following alternative
command sequences); > = Insert Form
Paper Source:
P1 = 0 : Manual Feed **)
P1 = 1 : ASF, Bin 1 *)
P1 = 2 : ASF, Bin 2 *)
P1 = 3 : ASF, Bin 3 *)
P1 = 6 : upper Tractor ***)
P1 = 7 : Tractor Feed (lower Tractor)
P1 = 8 : ASF, Bins 1 or 2 *)
P1 = 9 : ASF, Bins 2 or 3 *)
P1 = 1 0 : ASF, Bins 1 or 2 or 3 *)
P1 = 1 5 : upper and lower tractor ***)
P2 = 0 : Automatic Gap Control
P2 = 1 : Print Gap for 1-ply copy
P2 = 2 : Print Gap for 2-ply copies
P2 = 3 : Print Gap for 3-ply copies
P2 = 4 : Print Gap for 4-ply copies
P2 = 5 : Print Gap for 5-ply copies
P2 = 6 : Print Gap for 6-ply copies
F-5
Appendix F EPSON LQ 2550 and ESC/P2 Quick Reference
Table B-4: (Cont.) Vertical Form Handling
Escape Sequence Mnemonic Function
ESC [ ; ; P3 s
Native Command
ESC [ ; ; ; P4 s
Native Command
(cutting edge is approximate 4 mm above the base of the actual line)
***) only PRINTER TYPE 1 and PRINTER TYPE 3
*) only PRINTER TYPE 1
****) only PRINTER TYPE 3
F-6
Paper Exit:
P3 = 0 : Paper Exit Stacker ***)
P3 = 1 : Paper Exit Front Side *)
(confirmed by Start/Stop key)
P3 = 2 : Paper Exit Front Side *)
(not confirmed by Start/Stop
key, controlled by application)
P3 = 3 : Batch output; rear side
Cut Mode On/Off: ****)
P4 = 0 : Cut Mode Off
P4 = 1 : Cut Mode On
P4 = 2 : Cut on actual position