Cardin Elettronica PRG304 Vorlaufige Bedienungsanleitung Seite 8

IMPORTANT REMARKS
TO REDUCE THE RISK OF SEVERE INJURY OR DEATH READ THE FOLLOWING REMARKS CARE-
FULLY BEFORE PROCEEDING WITH THE INSTALLATION. PAY PARTICULAR ATTENTION TO ALL
THE PARAGRAPHS MARKED WITH THE SYMBOL
TIONS COULD COMPROMISE THE CORRECT WORKING ORDER OF THE SYSTEM.
• These instructions are aimed at professionally qualified "installers of electrical equipment" and must respect
the local standards and regulations in force. All materials used must be approved and must suit the environment
in which the installation is situated.
• All maintenance operations must be carried out by professionally qualified technicians. Before carrying out any
cleaning or maintenance operations make sure the power is disconnected at the mains.
• This appliance must be used exclusively for the purpose for which it has been made. "i.e. for the command and
control of automatic installations with a 230 Vac power supply".
Any non authorised modifications are to be considered improper dangerous and the complete responsibility of the
installer.
• A correct earth connection is fundamental in order to guarantee the electrical safety of the machine.
• Periodically check the condition of the power cable: If it shows any sign of wear or damage have it replaced by
the manufacturer or an authorised after sales service technician.
TECHNICAL SPECIFICATIONS
Power supply
Frequency
Overall power consumption
Nominal current input
Motors
Maximum motor power consumption
Operating temperature
Inputs
Powers supply binding posts 230 Vac 50-60 Hz
Earth binding post
Antenna binding post
Opening button input contact NO
Closing button input contact NO
Blocking button input NC
Anemometer signal input
Inverting photocells contact NC
Safety edge contact NC
Analogical safety edge input (8.2 kΩ)
Outputs
Power output for 1 motor 600 W
Output powering external devices 24 Vac 7 W
Work time
Maximum programmable time
Pause time
Minimum programmable time
Maximum programmable time
IMPORTANT REMARKS
. NOT READING THESE IMPORTANT INSTRUC-
8
IMPORTANT REMARKS
Vac
Hz
W
A
Nr.
W
°C -20...+55
s
s
s
230
50-60
650
2,8
1
600
180
1
60