Installing The Cap Over The Speaker/ Microphone Jacks; Installing The (Optional) Speaker/ Microphone Or Headset - Kenwood NX-3000 Serie Benutzerhandbuch

INSTALLING THE CAP OVER THE SPEAKER/
MICROPHONE JACKS <NX-3220/ NX-3320>
Note:
To keep the transceiver water resistant, you must cover the speaker/
●
microphone jacks with the supplied cap.
.
1 If you are not using an optional
speaker/ microphone or headset,
install the cap over the speaker/
microphone jacks.
2 Secure the cap in place using the
dressing screw.
INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE
OR HEADSET <NX-3220/ NX-3320>
1 Insert the speaker/ microphone plugs
into the speaker/ microphone jacks of
the transceiver.
2 Place the locking bracket over the
speaker/ microphone plugs so that
the locking tabs insert into the
transceiver grooves.
3 Secure the locking bracket in place
using the dressing screw.
16
Speaker/
microphone
jacks cap
Speaker/ microphone
locking bracket