Technical Data - Hilti AG 125-A22 Bedienungsanleitung

Designation
Battery
Battery
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries

4. Technical data

Right of technical changes reserved.
Power tool
Rated voltage
Rated speed
Cutting discs / grinding discs
Dimensions (L x H x W) without hood
Weight in accordance with EPTA procedure
01/2003
Battery
Rated voltage
Capacity
Energy capacity
Weight
Type of cell
No. of cells
Deep discharge protection
Information about the power tool and applications
Drive spindle thread (arbor size)
Spindle length
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working
period. An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
Printed: 31.07.2012 | Doc-Nr: PUB / 5071441 / 000 / 00
Short designation
B 22/2.6 Li ion
B 22/3.3 Li ion
C 4/36, C 4/36 ACS or
C 4/36 ACS TPS
C 4/36 90
C 4/36 350
AG 125 A22
21.6 V
9,500/min
Ø 125
351 mm x 131 mm x 93 mm
2.7 kg
B 22/2.6 Li ion
21.6 V
2.6 Ah
56.16 Wh
0.78 kg
Li-ion
12
Yes
M 14
22 mm
Description
B 22/3.3 Li ion
21.6 V
3.3 Ah
71.28 Wh
0.78 kg
Li-ion
12
Yes
en
25