Safety Precautions - OHAUS YS Serie Bedienungsanleitung

YS Series Balances
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the YS
Series Scales. Please read the manual completely before using the scale.

1.1 Safety Precautions

Please follow these safety precautions:
•
Verify that the AC Adapter input voltage matches the local AC power supply.
•
Use the scale only in dry locations.
•
Do not operate the scale in hostile environments.
•
Do not drop loads on the platform.
•
Do not place the scale upside down on the pan.
•
Service should be performed only by authorized personnel.
1.2. Controls
Button Functions
Short Press: (when Off)
TARE
On
Long Press:
Yes
Short Press (Menu)
Short Press
MODE
Long Press:
Off
Short Press (Menu)
No
Weighing Platform
Display Buttons
Figure 1-1. Controls.
TABLE 1-1. CONTROL FUNCTIONS.
(when on)
AC Adapter Receptacle
Calibration Menu Lockout Switch
Turns scale on
Sets display to zero
Tares weight of item on pan
Enters menu
Selects the displayed item
Steps through active units and modes
Turns the scale Off
Advances to the next selection
EN-1