en
34 | TCE 4220 | Decommissioning
6.3
Spare and wearing parts
Denomination
Mounting tool adhesive tag
Electrical tension adhesive tag
Bead breaker adhesive tag
Aisles protections for 20" plate
Bead breaker blade screw
Mounting tool
Tool tab protections (5 pieces)
Mounting tool cover
Bead breaker blade
Front bead breaker support
Rear bead breaker support
|
1 695 105 430
2010-02-16
7.
7.1
Order code
1 695 100 982
Procedure:
1 695 100 789
1. Disconnect electrical connection.
1 695 100 983
2. Disconnect pneumatic connection.
1 695 105 083
3. Dismantle the column switch and lean it at the side.
1 695 103 347
4. Follow what shown for first start up (see chap. 4.2).
1 695 102 647
5. Fix again the TCE 4220 with its four screws on the
1 695 101 608
pallet (see chap. 4.2).
1 695 102 725
1 695 100 897
i
In case of sale or transfer of TCE 4220, all the docu-
1 695 100 643
ments included in the consignment volume has to be
1 695 100 654
integrally handed over together with the equipment.
7.2
If the TCE 4220 is going to be stopped for a limited
period of time or if the equipment is not being used
for other reasons, always disconnect the network plug
from its socket!
It is suggested to clean accurately the TCE 4220, also
its tools and accessories, and carry out a protection
treatment (e.g. spraying of a thin oil film).
7.3
Disconnect the TCE 4220 from the mains tension
and take off the power supply cable.
Oil are water pollution risk fluids and have to be
disposed of in accordance with the rules in force.
Disassemble the TCE 4220, order the materials ac-
cording to the category it belongs to and dispose of
them according to the rules in force.
Decommissioning
Place change
Temporary decommissioning
Disposal
TCE 4220 complies to the rules of the Euro-
pean directive 2002/96/CE (directive on the
disposal of electrical and electronic waste).
Electric and electronic devices which are out
of order, together with their cables, accesso-
ries, accumulators and batteries, have to be
disposed of separately from household waste.
For disposal of such products, use the
available return and collection systems.
The correct disposal of the TCE 4220
makes it possible to avoid environmental
damage and to put at no risk the life of
people.
Robert Bosch GmbH