Joie i-Gemm Bedienungsanleitung Seite 9

Squeeze the head support
adjustment lever 22 , meanwhile pull
up or push down the head support
until it snaps into one of the 7
positions. The head support positions
are shown as
23
13
22
23
Securing Child
in the Infant Child Restraint
Note
1. Infant insert is for children's
protection. Children whose
height is under 60cm are
suitable to use the infant insert.
2. Before using the insert, please
add the foam wedge. 24
3. After the child is placed in the
seat, check if the shoulder
harnesses are set to the correct
height.
Remove the head support portion of the infant
insert when the child's head no longer fits
comfortably. Detach the snaps on the head
support to remove the head portion of the insert.
Remove the body portion of the infant insert
when the infant's shoulders no longer fit
comfortably.
1. While pressing the harness
adjustment button, pull completely
the two shoulder harnesses of the
infant carrier module. 25
24
25
14