Using Of Cable With Bnc Plugs - Mettler Toledo InTrac 776-SL Betriebsanleitung

26
4.6

Using of cable with BNC plugs

If your pH cable has a BNC connector, you cannot use the stan-
dard rubber grommet with antiknick on the protective sleeve as
the bore is too narrow to allow passage of the BNC connector.
In this case, simply unscrew both the antiknick and the grom-
met (A), put the rubber split grommet around the cable instead,
and insert this into the protective sleeve (B).
InTrac 777-SL-04-CH
52 400 841
A
© 06/00 Mettler-Toledo GmbH, CH-8606 Greifensee
InTrac ® 777-SL / InTrac
B
Printed in Switzerland
® 776-SL