Safety Instructions - VOLTCRAFT VC-310 Bedienungsanleitung

5. SAFETY INSTRUCTIONS

Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) Persons / Product
• This product is only designed for use in dry environments. The entire product
must remain dry and must not become wet or damp. Never touch the product
with wet hands to avoid damaging it.
• The product is not a toy and must be kept out of the reach of children.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• The voltage between the connection points must not exceed the specified
voltage.
• Be particularly careful when dealing with voltages >25 V/AC and >35 V/DC! At
these voltages you may receive a fatal electric shock when touching electrical
conductors.
• Set the measuring device to the desired unit before each measurement. A false
measurement may destroy the product!
• When taking measurements, ensure that no objects are trapped by the current
clamp sensor, such as cables.
• Inspect the measuring device for damage before each measurement. Never take
measurements when the insulation or the product is damaged.
• When taking measurements, ensure that the connections/measuring points do
not touch each other. There is a risk of a short circuit!
19