Programme Information; Selecting Audio Channels - Silvercrest SSR 576 A1 Bedienungsanleitung Und Serviceinformationen

Programme Information

After powering on or switching to a different channel, an information window about the current
programme will appear:

Programme preset

TV or radio mode

Channel name

Aspect ratio

Audio format

Clock time

Title of the current programme

Progress bar of the current programme

Title of the next programme

Radio text

Radio Screen Show (RASS)
The amount and detail of the displayed information depends on the channel provider. For example,
some channels do not broadcast any detailed programme information. Some radio stations offer a
radio text. If available, this will be directly displayed for you. This radio text shows, for example, the
title and performer of the song playing or current affairs. Furthermore, some radio stations offer
Radio Screen Show (RASS). The radio screen show (RASS) is currently supported by the following
German radio stations only: SWR3, DasDing, SWRcont.ra. If a Radio Screen Show is broadcast,
after a few seconds of loading programme information or current affairs are displayed. You can press
the TEXT button (38) to toggle to interactive mode. Interactive mode allows you to select individual
pages via the numeric buttons (32). To quit interactive mode, press the TEXT button (38) or EXIT
(39).
You can display the information window at any time by pressing the LIST button (27). You can
change the timeout for the information display (Edit Settings | OSD/EPG | Status Time-out).
Note: If you can't access a specific channel, the favourite list is probably active. To select the desired
list, press the FAV [Yellow] button (44) and then press the P+ (28) or P- (30) buttons to select the
desired list. <none> represents the entire channel list.

Selecting Audio Channels

Some programmes are broadcast with multiple audio channels. These audio channels can be
different audio languages or different radio channels. To select an audio channel or a language,
press the [Blue] button (43). Press P+ (28) or P- (30) to select the desired option and press the OK
button (40) to confirm. Press the EXIT button (39) to quit the menu.
To save a specific audio channel for the currently tuned-in channel, keep the OK button (40) pressed
until the menu closes automatically.
You can also use the LIST button (27) to choose the left or the right audio channel. The default is
Stereo sound. To be able to play Dolby Digital/AC3 sound, your TV set needs a specific decoder or
you can connect your satellite receiver to an AC3-compatible amplifier.
Digital SD Sat Receiver SSR 576 A1
English - 31