Cleaning And Care; Technical Data - Beper 40.740 Betriebsanleitung

Rechargeable hair clipper Use instructions

CLEANING AND CARE

Before cleaning, remove the plug of the Switching adaptor from the mains power socket.
Never submerse the appliance in water or other liquids.
Take the attachment comb, if fitted, off.
Take the detachable blade set (see illustrations below).
Using exclusively the cleaning brush, remove the pet fur from the cutting head. The cutting head
may not be cleaned with water or other liquids, except medical alcohol!
If in regular use, the cutting head should be oiled. For this, use the supplied blade oil.
Remove excess oil with a dry cloth.
Clean the housing with a soft, dry lint-free cloth.
Store the appliance in a dry and dust free location.

TECHNICAL DATA

100-240V ~ 50/60Hz
Input: 3.8V 1300mA
Batteries: 2x1,2V 1200mAh NiMH (AA)
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
15
EN