Cleaning The Shaver; Cleaning With The Brush - Panasonic ES-LF51 Bedienungsanleitung

Clean
Cleaning the shaver
1. Disconnect the power cord from the shaver.
. Apply some hand soap and some water to
the outer foil.
. Rotate the lock ring to unlock the power
switch.
4. Press the power switch for more than 
seconds to activate the sonic vibration
cleaning mode.
•
The battery capacity lamps blink in order.
•
After about 0 seconds, it will be
automatically turned off, or you can turn it
off by pressing the power switch.
5. Remove the outer foil section and press the
power switch for more than  seconds to
activate the sonic vibration cleaning mode
and clean it with running water.
6. Wipe off any drops of water with a dry cloth.
7. Dry the outer foil section and the shaver
completely.
8. Attach the outer foil section to the shaver.
9. Lubricate the shaver.
6
ES-LF51_EU.indb 6
Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
4
1. Switch off the shaver.
. Apply one drop of oil to each of the outer foils.
. Raise the trimmer and apply a drop of oil.
4. Switch the shaver on, and run it for
approximately five seconds.
5. Switch off the shaver, and wipe off any excess
oil from the outer foils with a soft cloth.
5
Cleaning with the brush
Clean the inner blades using the
short brush by moving it in direction
(A).
Clean the system outer foil, the
shaver body and the trimmer using
the long brush.
•
Do not move the short brush in
direction (B) as it will damage the
inner blades and affect their
sharpness.
•
Do not use the short brush to
clean the outer foils.
(A) (B)
2011/03/03 16:21:05