Selecting A Stored Station; Timer Function; Setting The Clock; Setting The Timer - Samsung MX-HS8000 Bedienungsanleitung

3.
Find a station by:
• Pressing and holding the TUNING/ALBUM
, or . button on the remote control
to automatically search for broadcasting
stations.
4. Press the MO/ST button to switch between
stereo and mono.
• In a poor reception area, select MONO for
a clear, interference-free broadcast.
• This applies only when listening to an FM
station.
5.
If you do not want to store the radio station
found, go back to Step 3 and search for
another station.
Otherwise:
a. Press the ¬ button.
b. Or, press the TUNING/ALBUM button
on the remote control to select a program
number in the PRESET mode.
c. Press the ¬ button to save the preset.
6.
To store other radio frequencies, repeat Steps
3 to 5.

Selecting a Stored Station

To listen to a stored station, follow these steps:
1. Select FM by pressing the TUNER/AUX
button on the product or remote control.
2. Press the TUNING MODE button on the
remote control until "PRESET" is displayed.
3.
Press the 1 , 2 buttons on the main unit or
the TUNING/ALBUM ,, . buttons on the
remote control to select a preset number.

Timer Function

Setting the Clock

For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Press the TIMER SET button on the remote
control twice. "CLOCK SET" is displayed.
2.
Press the ¬ button on the remote control.
The hour flashes.
• To increase the hours: TUNING/ALBUM ,
• To decrease the hours: TUNING/ALBUM .
3.
When the correct hour is displayed, press the
¬ button, and then the minutes flash.
• To increase the minutes: TUNING/ALBUM ,
• To decrease the minutes: TUNING/ALBUM .
4.
When the correct minute is displayed, press
the ¬ button. "TIMER PLAY SET" appears
in the display.

Setting the Timer

The timer enables you to set the product to switch
on or off at specific times automatically.
• Before setting the timer, check that the current
time is correct.
• For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
• If you no longer want the product to be switched
on or off automatically, you must cancel the
timer by pressing the TIMER ON/OFF button.
Example: You want to wake up to
music every morning.
1. Press the TIMER SET button until TIMER
PLAY SET is displayed.
2.
Press the ¬ button.
Result: ON TIME is displayed for a few
seconds. You can set the timer switch-on
time.
21
English