Technical Specifications; Troubleshooting - Kärcher DS 6 Bedienungsanleitung

Technical specifications

Nominal voltage
1~50-60 Hz
Fill capacity of the water filter
reservoir
Weight (without accessories)
Nominal width, accessories
Eco design as per 666/2013
Energy efficiency category
Indicative annual energy con-
sumption
Carpet cleaning class
Hard floor cleaning class
Dust emission class
Sound power level L
Rated power input
DS 6 Premium:
DS 6 Premium Mediclean:
HEPA filter H 13 class according to EN 1822 (effective
1998)
DS 6:
HEPA filter H 12 class according to EN 1822 (effective
1998)
Subject to technical modifications!
16
220-240
2,0
7,5
35
A
28,0
D
B
A
80
WA
650
You can rectify minor faults yourself with the help of the
V
following overview.
If in doubt, please consult the authorized customer ser-
l
vice.
kg
Power supply is interrupted
mm
 Remove the mains plug, check the connecting ca-
ble and the mains plug for damage.
Weak/diminishing suction power
kWh/a
Forgot the baffle plate or not inserted correctly
 Reinsert the baffle plate correctly.
(see: FILLING THE WATER FILTER RESER-
VOIR)
Intermediate filter missing or not inserted correctly
 Check the intermediate filter.
dB(A)
Intermediate filter is dirty
W
 Wash the filter, install new intermediate filter if re-
quired.
(see: CARE, MAINTENANCE)
Intermediate filter is wet
 Let the intermediate filter dry or install new dry filter.
(see: CARE, MAINTENANCE)
Strong foam generation in the water filter reservoir
 Replace the water and add 1 to 2 capfuls of Foam-
Stop. Check the intermediate filter for moisture. If
necessary, clean the damp filter under running wa-
ter and allow it to dry afterwards or install new filter.
Too little or too much water in the water filter
reservoir
 Check the MIN / MAX marks on the reservoir.
HEPA filter is soiled
 Replace the HEPA filter.
(see: CARE, MAINTENANCE)
Accessory is blocked
 Remove the blockage.
(see: CARE, MAINTENANCE)
False air slide at the handle is open
 Close the false air slide.
(see: WORKING WITH THE FLOOR NOZZLE)
The cover of the water filter is not properly installed
 Properly install the cover of the water filter contain-
er.
The water filter is not properly installed
 Remove the water filter and correctly insert it into
the appliance.
(see: FILLING THE WATER FILTER RESER-
VOIR)
– 10
EN

Troubleshooting

Appliance does not vacuum
Appliance flap does not close