Maintenance And Care - Kärcher IB 15/80 Bedienungsanleitung

 Press the trigger at the jet pistol until all
dry ice residue is removed from the ma-
chine.
 Close the compressed air supply.
 Press the trigger (release lever) of the
compressed air jet at the jet pistol until
there is no pressure left in the device.
 Press emergency-stop button.
 Disconnect the machine from the com-
pressed air inlet.
 Disconnect the main plug from the
socket.
Transport
Danger
Risk of accident on account of dry ice resi-
due in the device. Remove all traces of dry
ice before transporting the device in closed
vehicle; otherwise there is a risk of carbon
dioxide suffocation to the co-passengers.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 Carry out all the steps listed in the chap-
ter "Shut down" before transporting the
device.
 Mount the appliance on the transport
vehicle.
 Lock the breaks of the steering rollers.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Storage
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Maintenance and care

Overview of the device
1 Dosing equipment
2 Pressure balancing channel
16
Maintenance instructions
The bases of a safe operating of the equip-
ment is thr regularly maintenance accord-
ing to the following maintenance plan.
Use exclusively original parts of the manu-
facturer or those parts recommended by
him like
parts and wearing parts,
–
accessories parts,
–
operating materials,
–
cleaning agents.
–
Danger!
Risk of accident while working on the appli-
ance. Carry out all the steps described in
the chapter "Shut down" before starting
anhy work on the device.
Warning
Risk of cold burns on account of dry ice or
cold parts of the machine. While working on
the machine, wear appropriate safety gear
for protection against cold or remove dry
ice and let the machine heat up.
Never put dry ice in your mouth.
Maintenance contract
In order to guarantee a reliable operation
og the equipment, we success, you signed
a maintenance agreement. Please refer to
you local Kärcher service department.
Maintenance schedule
Daily before starting operations
 Check the spray agent hose for damag-
es, bends and other damages. Soft ar-
eas in the hose indicate wear on the
inner side of the hose. Replace the de-
fective or worn out hose with a new
hose.
 Check electrical cable and plug for
damages. Get defective parts replaced
by Customer Service.
 Drain out the water from the water sep-
arator and dispose it off (see "Mainte-
nance tasks").
Every 100 operating hours
 Check couplings of the spray agent
hose, on the device, at the jet pistol for
damages or wear and tear. Get Cus-
tomer Service to replace the defective
hose, defective couplings on the device
or jet pistol.
 Check dosing equipment for damages
or leaks. If you find any damages/
leaks, inform Customer Service.
 Check tire pressure of rear wheels (re-
fer to specifications).
 Check the attachment caps of the rear
wheels for proper seating.
Every 500 hours or once a year
 Get the device checked by Customer
Service.
Every 2 years
 Replace the spray agent hose at least
once in 2 years.
5
-
EN
Opening the device
The side panels of the device must be re-
moved to access the device for mainte-
nance jobs:
1 Snap closure
2 Side panels
 Turn the snap closures in the anti-clock-
wise direction.
 Unhook the side panel and remove it.
Maintenance Works
Empying the water separator
The water separator is located:
at the pressure reducer in the machine
–
(under the side panel)
In the water separator attachment set
–
(accessory)
1 Drain screw
2 Filling level marking
The water must be drained off if the water
level has reached the upper filling level
marking.
Manual emptying:
 Interrupt the compressed air supply.
 Open the drain screw and collect the
water that will flow out.
Semi-automatic emptying:
 Remove the drain screw.
 The collected water drains off every
time the compressed air supply is inter-
rupted.
 Collect the water that flows out.
Note
Dispose off the collected water according
to the applicable rules and regulations.