WHAT TO DO IN CASE OF A PROBLEM
The hob or the cooking zone doesn't start-up:
The hob is badly connected on the electrical network.
The protection fuse cut-off.
The locking function is activated.
The sensitive keys are covered with grease or water.
An object is put on a key.
The control panel displays [ U ]:
There is no pan on the cooking zone.
The pan is not compatible with induction.
The bottom diameter of the pan is too small.
The symbole [ E ] displays :
The electronic system is defective.
Disconnect and replug the hob.
Call the After-sales Service.
One or all cooking zone cut-off:
The safety system functioned.
You forgot to cut-off the cooking zone for a long time.
One or more sensitive keys are covered.
The pan is empty and its bottom overheated.
Continuous ventilation after cutting off the hob:
This is not a failure, the fan continuous to protect the electronic device.
The fan cooling stops automatically.
The automatic cooking system « go and stop » doesn't start-up :
The cooking zone is still hot [ H ]
The highest power level is set [ 9 ]
The cooking level was engaged with [ - ]
The control panel displays [ U ]:
Refer to the chapter "Keep warm"
The control panel displays [ II ]:
Refer to the chapter "Pause ".
ENVIRONMENT PRESERVATION
The materials of packing are ecological and recyclable.
The electronic appliances are composed of recyclable, and sometimes harmful materials
for the environment, but necessary to the good running and the safety of the appliance.
Don't throw your appliance with the household refuses
Get in touch with the waste collection centre of your
commune that is adapted to the recycling of
the household appliances.
56