Inhaltsverzeichnis
Werbung
ENGINE/COOLANT LEVEL INSPECTION
EC350000
ENGINE
EC351011
COOLANT LEVEL INSPECTION
WARNING
Do not remove the radiator cap 1, drain
bolt and hoses when the engine and radia-
tor are hot. Scalding hot fluid and steam
may be blown out under pressure, which
could cause serious injury.
When the engine has cooled, place a thick
towel over the radiator cap, slowly rotate
the cap counterclockwise to the detent.
This procedure allows any residual pres-
sure to escape. When the hissing sound
has stopped, press down on the cap while
turning counterclockwise and remove it.
CAUTION:
Hard water or salt water is harmful to the
engine parts. You may use distilled water, if
you can't get soft water.
1. Place the machine on a level place, and
hold it in an upright position.
2. Remove:
Radiator cap
G
3. Check:
Coolant level a
G
Coolant level low → Add coolant.
1 Radiator
3 - 5
INSP
ADJ
Werbung
Inhaltsverzeichnis
