Replacing The Shaving Heads - Philips S95 Serie Bedienungsanleitung

24
English
2 Switch on the appliance.
3 Rinse the beard styler attachment and the comb separately under
a warm tap (Fig. 49).
4 After cleaning, switch off the appliance.
5 Carefully shake off excess water and let the beard styler
attachment and comb dry.
6 For optimal performance, lubricate the teeth of the attachment
with a drop of sewing machine oil regularly.
Storage
1 Store the appliance in the pouch supplied (Fig. 50).
Note: Make sure the appliance is dry before you store it in the pouch.
Replacement

Replacing the shaving heads

For maximum shaving performance, we advise you to replace the
shaving heads every two years (Fig. 51). Replace damaged shaving
heads immediately. Always replace the shaving heads with original
Philips shaving heads (see ‚Ordering accessories').
Replacement reminder
The replacement reminder indicates that the shaving heads need to
be replaced.The shaving unit symbol lights up continuously,
the arrows flash white and you hear a beep when you switch off the
shaver (Fig. 52).
1 Switch off the appliance.
2 Pull the shaving head holder off the bottom part of the shaving
unit (Fig. 44).
3 Place the retaining ring holder on the retaining ring (1), turn it
anticlockwise (2) and lift it off the shaving head (3).
Remove the retaining ring from the retaining ring holder and repeat
this process for the other retaining rings.