Installation Precautions; Case 1 : Installing On The Stand; Installing The Blu-Ray Disc Player - Samsung BD-D7500 Bedienungsanleitung

You can install your player on a stand or hang it on the wall.
When installing the player, please make sure that enough space is left to insert a disc.
If you do not, player will not operate normally.

Installation Precautions

• If you install your player on a wall, the wall must be flat and vertical.
• Avoid installing the player in areas with high temperature or humidity, or on a wall that cannot sustain
the weight of the set.
• Check the strength of the wall. If the strength of the wall is insufficient to support the player, make sure
to reinforce the wall before installing.
• Check the compostion of the wall. If the wall is made of plaster board, marble, or iron board, purchase
and use the appropriate mollies and fixing screws.
• Connect all cables from external devices (TV, etc.) to the player before you install it.
• If you are installing the player onto plasterboard (dry wall), we recommend locating a stud behind the
wall and screwing the support screws into the stud.
• To prevent electric shock, be sure to turn off the player before you install it.
• Do not hang on the installed player and avoid hitting it.
• Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in injury or in
damage to the product.
• If you install the player on a wall, please make sure that a child does not pull any of connecting cables,
as it may cause the player to fall.

Case 1 : Installing on the stand

To install on the Stand, insert the Stand Holder into the bottom slot of the Blu-ray Disc player.

Installing the Blu-ray Disc Player


English