All Reset - JVC DT-V21G11 Bedienungsanleitung

INFORMATION
Settings for the information display of the monitor.
Item Content
POSITION
Select the position to show the information display (
Information Display" on page 11).
SOURCE ID Select whether the name assigned in "CHARACTER SET." is displayed on
the screen (
• When "AUTO" is selected, the display color synchronizes with the color
CHARACTER SET. * Assign a name to each video source as you like (10 characters at maximum).
1
You can also enter a name using the RS-232C system.
Setting of "CHARACTER SET."
1
2
3
4
5
6
STATUS DISPLAY Select whether the status of the current input and the setting of MUTING
are displayed on the screen (
TIME CODE Select the type of the TIME CODE display.
CRC ERROR Select whether the CRC error indication for the input HD SDI/SD SDI signal
is displayed on the screen (
SUB HOUR METER Display the hours of use (unit: hour).
You can reset this item.
MODEL Display the model name of the monitor.
VERSION Display the version of the monitor.
HOUR METER Display the total hours of use (unit: hour).
This item is used for maintenance of the monitor. You cannot reset this item.
* 1 Memorized for each input.
* 2 Ancillary time code

all reset

Restores all the settings and adjustments of the monitor to the default.
"HOUR METER" and the settings done by using the adjustment knobs on the front panel will not be reset.
If reset while the AC power is on, the monitor turns off (standby), and then turns on automatically.
"On the Information Display" on page 11).
of the tally lamp while the tally lamp is lit.
Change the input to one that you want to assign a video source
name for.
Select "CHARACTER SET."
Press the buttons to select a character to enter at first.
Each time you press the button, the characters change in the
following order. Press button to reverse the order.
space
Press button to move the arrow to the next space.
The characters entered before moving the arrow are memorized.
Repeat steps 3 and 4 (10 characters at maximum).
Press MENU button to store the name.
"On the Status Display" on page 12).
"On the Information Display" on page 11).
Setting value
UPPER
"On the
LOWER
OFF
ON
AUTO
AUTO, OFF, ON
VITC * , LTC *
2
OFF
ON
EN
, D-VITC
2
21