Finish Operation; Maintenance And Care - Kärcher SE 5.100 Originalbetriebsanleitung

Wet vacuum cleaning
Caution
Do not use a filter bag!
Immediately switch the appliance off or pull
the power plug if foam forms or liquids es-
cape!

Remove the fresh and wastewater con-
tainers, vacuum the wet dirt directly into
the container.

Use wash nozzles to vacuum moisture or
wetness.

Once the wastewater container is full, the
appliance switches off automatically.
Note: Once the appliance shuts off,
switch off the appliance, because the suc-
tion turbine will otherwise start running
again once you open the appliance.
If you use a crevice nozzle:

Attach and secure the adapter for wet/dry
vacuuming. Install the crevice nozzle di-
rectly to the adapter.

Switch on the vacuum process.

Finish operation


Turn off the appliance.

Drain the full container.

Rinse the reservoir thoroughly with clear
water.

Separate the handle, the spray/suction
hoses and the wash nozzle from each oth-
er; open locking lever to achieve this (cen-
tre position),

Flush the accessories separately under
runningn water and let air dry.

Leave the appliance open to let it dry.
Illustration

Accessories storage: Suction hose,
suction pipes and accessories can be
comfortably stored on the appliance.

Storing the appliance. Store the appli-
ance in a dry room.

Maintenance and care

Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
Repair works may only be performed by the
authorized customer service.
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in wa-
ter.
Clean the spray nozzle
With an uneven spray jet.
Illustration

Loosen nozzle attachment and pull out,
clean or replace spray nozzle.
Clean the sieve in the fresh water
1 x year or as needed.
Illustration

Clean sieve.
Clean flat fold filter
For heavy contamination:
Illustration

Release the cover and fold it open, re-
move the flat fold filter and knock the dirt
out.
- 6
EN
reservoir
17