Yamaha TT-R125E Handbuch Seite 390

CRANKCASE, CRANKSHAFT AND BALANCER
2. Install:
Balancer
G
NOTE:
Align the punched mark a on the balancer
drive gear with the punched mark b on the
balancer driven gear.
Crankcase
1. Apply:
Sealant
G
On the right crankcase 1.
Quick gasket
ACC-QUICK-GS-KT
YAMAHA Bond No.1215:
90890-85505
NOTE:
Clean the contacting surface of crankcase (left
and right) before applying the sealant.
2. Install:
Dowel pin 1
G
Right crankcase
G
On left crankcase.
NOTE:
Fit the right crankcase onto the left crank-
G
case. Tap lightly on the case with soft ham-
mer.
When installing the crankcase, the connect-
G
ing rod should be positioned at TDC (top
dead center).
4 - 73
ENG
®
: