Assembly; Mount Handgrip; Assemble/Set Protective Hood; Installing/Changing Disc - Parkside 275389 Originalbetriebsanleitung

Assembly

Caution! Risk of injury!
- Ensure that you have sufficient
space in which to work, and that
you do not endanger other peo-
ple.
- All hoods and protective devices
must be assembled properly be-
fore commissioning.
- Disconnect the mains plug be-
fore changing the setting on the
device

Mount handgrip

The device must only be
operated with the handgrip
mounted.
Screw the handgrip (1), depending on the
type of work, to the threading for the hand-
grip left (8), right (see figure
top (2) at the device.
Assemble/set protective
hood
Adjust the protective hood so that a sparks
or superseded parts not the user nor
bystanders can meet.
The position of the guard has also to be
made, so that the sparks flammable parts,
also surrounding, not inflamed.
1. Open the tightening lever
( 19)
2. Place the protective hood
( 14) on the positioning holes.
If needed, the tension on the adjustment
nut (
(

Installing/changing disc

) or at the
3. Turn the protective hood
( 14) into the working positi-
on. The closed side of the protec-
tive hood must always face the
operator.
4. Close the tightening lever
( 19) again. The protective
hood should not be able to be
turned any more.
18) can be set. Use the chuck key
13) for this.
1. Press the spindle stop button
( 9).
2. Turn the mounting spindle (
17) until the spindle lock fixed
the mounting spindle. Keep and
continue to hold down the spind-
le lock button (
3. Release the clamping nut
( 16) with the chuck key
( 13). You can release the
spindle lock button (
4. Set the desired disc onto the
mounting flange (
on the disc should always face
the device.
5. Set the clamping nut (
on the mounting spindel (
17) again. The flat side of the
clamping nut must face the at-
tachment tool.
6. Press the spindle stop button
( 9) and rotate the mounting
spindle (
lock fixed the mounting spindle.
Pull the clamping nut (
with the chuck key (
ly. You can release the spindle
stop button (
GB
9)
9).
15). label
16)
17) until the spindle
16)
13) firm-
9).
37