Imow - Machine Settings - Viking MI 422.1 Gebrauchsanleitung

– Time and date
– Start time:
Start of the next planned mowing
operation
– Total number of completed mowing
operations
– Mowing hours:
Duration of all completed mowing
operations in hours
– Distance:
Total distance covered in metres
– Ser.-No.:
Serial number of the robotic mower.
This can also be found on the
identification plate (see Machine
overview). ( 3.1)
– Battery:
Serial number of the battery
– Software:
Installed machine software
4. Lawn status:
Information on the lawn
– Mowing area in square metres:
This value is entered during initial
installation or new installation (
– Round time:
Duration of one circuit around the
mowing area in minutes and seconds
– Starting points 1 – 4:
Distance of the relevant starting point
from the docking station in metres,
measured in a clockwise direction
( 11.15)
– Circumference:
Circumference of the mowing area in
metres
– Edge mowing:
Frequency of edge mowing per week
( 11.14)
0478 131 9935 C - EN
5. Radio module status
(MI 422 PC):
Information on the radio module
– Satellites:
Number of satellites within range
– Position:
Current position of the robotic mower;
available if the satellite connection is
strong enough
– GPRS:
Signal strength of the mobile radio
connection; the more plus characters
shown (max. "++++"), the better the
connection
– Network:
Network ID, comprising country code
(MCC) and provider code (MNC)
– Mobile phone number:
Mobile phone number of the owner; is
entered in the app (
– IMEI:
Hardware number of the radio module
– IMSI:
International mobile subscriber identity
– SW:
11.14)
Software version of the radio module
– Ser.-No.:
Serial number of the radio module
11.10 Settings
1. iMow:
Adapt machine settings
( 11.11)
2. Installation:
Adapt and test the installation
( 11.14)
3. Safety:
10.)
Adapt the safety settings (
4. Service:
Maintenance and service (
5. Dealer area:
This menu is protected by the
dealer code. Your specialist
dealer performs a variety of maintenance
and service operations with the aid of this
menu.
11.11 iMow – machine settings
1. Rain sensor:
The rain sensor can be set so that
mowing is interrupted or does not
start when it is raining.
● Setting the rain sensor (
11.16)
11.17)
11.12)
127