Operation - Bosch MSM78 serie Gebrauchsanleitung

Explanation of symbols on the appliance
and accessories
Caution: Rotating tools.
Do not insert fi ngers into the fi lling
opening.

Operation

Clean the appliance and accessories
thoroughly before using for the fi rst time, see
»Cleaning and care«.
Blender
Risk of injury due to sharp blade/
rotating drive
Never touch the blade on the mixer foot.
Do not clean the mixer foot blade using
bare hands. Always use a brush.
Important:
Only fi t and remove the mixer foot when
the appliance has come to a complete
stop.
For mixing mayonnaise, sauces, mixed
drinks, baby food, cooked fruit and
vegetables. For pureeing soups.
The blender is not suitable for
preparing mashed potato.
Preparation
Fig. B
• Clean all parts before use.
• Fully unwind the mains cable.
• Insert the mixer foot into the basic unit
and click into place.
• Plug in the mains plug.
• Place the food in the mixing beaker or
similar high-sided beaker.
The blender works better if the food
to be processed contains some
liquid.
• Set the required speed using the speed
regulator.
- Turning to the right reduces the
rotary speed.
- Turning to the left increases the
rotary speed.
Robert Bosch Hausgeräte GmbH
In general, the turbo speed is
recommended for processing food. For
liquids, hot foodstuffs and for mixing
together solids and liquids (e.g. muesli
into yoghurt), it is advisable to use the
speed control.
The current speed is shown in the
speed display when the On/Off button is
activated. The more segments that light
up, the higher the set speed.
• Hold the blender and beaker fi rmly.
• Switch on the blender by pressing the
required On/Off button.
The blender remains switched on for
as long as the On/Off button is
pressed.
To prevent the mixing products from
spraying out, do not press the On/Off
button until the mixer foot is
immersed in the food to be mixed.
Always switch off the blender before
extracting it from the mixed food.
• When you have fi nished processing the
food, release the On/Off button.
• Unplug the mains plug.
• Press the release buttons and remove
the mixer foot from the basic unit.
Multi-function accessory with tools
Risk of injury due to sharp blade/
rotating drive
Never insert fi ngers into the bowl during
operation. Always use the pusher (13) to
push ingredients into the beaker.
The drive continues to run for a short
time after the blender is switched off. Do
not change the tool until the drive has
come to a complete stop.
When working with the multi-function
accessory, the appliance can only be
switched on if the drive unit is screwed
tightly in place.
Important:
Only fi t and remove the basic unit to/
from the drive unit of the multi-function
accessory when the appliance has come
to a complete stop.
en
11