Bosch GDR 9,6 V PROFESSIONAL Bedienungsanleitung Seite 15

Tool Specifications
Cordless Impact Screwdriver
Order number
No-load speed
Impact rate
Maximum torque, hard
screwdriving application according
to ISO 5393
Rotational direction switch
Screw diameter
Tool holder
Weight with battery, approx.
Battery
Temperature control
Rated voltage
Capacity
Weight, approx.
Please observe the order number of your machine. The trade names of the individual machines may vary.
Not all of the machines listed are available in all countries.
Machine Elements
The numbering of the machine elements refers to
the illustration of the machine on the graphics
page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 Tool holder
2 Locking sleeve
3 Soft grip
4 Carrying strap
5 Belt clip*
6 Battery unlocking button
7 Battery*
8 Knurled thumbwheel with LED indicator *
9 Rotational direction switch
10 Electronic On/Off switch
11 Screwdriver attachment (bit)
12 Universal bit holder
13 Cover lid
14 Carbon brush
* Not all of the accessories illustrated or described are
included as standard delivery.
15 • 2 609 140 255 • 04.09
GDR 9,6 V
PROFESSIONAL
0 601 909 6..
[rpm] 0 – 2 800
[bpm] 0 – 3 200
[Nm] 105
M 6 – M 12
1/4"
[kg] 1.6
NTC
[V=] 9.6
[Ah] 2.6
[kg] 0.6
Noise/Vibration Information
Measured values determined according to
EN 60 745.
Typically the A-weighted noise levels of the ma-
chine are: sound pressure level 92 dB (A); sound
power
uncertainty K = 3 dB.
Wear hearing protection!
The typically weighted acceleration is 16.5 m/s
Intended Use
The machine is intended to screw-in and loosen
bolts, as well as to tighten and loosen nuts within
the respective range of dimension.
Before Putting into Operation
Battery Charging
A battery that is new or has not been used for a
longer period does not develop its full capacity
until after approximately 5 charging /discharging
cycles.
To remove the battery 7, press the unlocking but-
tons 6 and pull out the battery downwards. Do not
exert any force.
English - 3
GDR 12 V GDR 14,4 V
PROFESSIONAL PROFESSIONAL
0 601 909 5.. 0 601 909 4..
0 – 2 800 0 – 2 800
0 – 3 200 0 – 3 200
125 135
M 6 – M 14 M 6 – M 16
1/4" 1/4"
1.8 1.9
NTC NTC
12 14.4
2.6 2.6
0.8 0.9
level 103 dB (A). Measurement
2
.