Whirlpool WMT502 Gebrauchsanweisung Seite 14

60202056.book Page 15 Friday, October 21, 2011 4:32 PM
HOW TO OPERATE THE REFRIGERATOR
COMPARTMENT
Switching on the appliance
Starting up the appliance
The appliance features internal controls.
Plug in the appliance.
When the appliance is connected to the mains, the inside light
switches on each time the door is opened. The thermostat,
located inside the refrigerator compartment, is used to adjust the
temperature of both the refrigerator compartment and low
temperature compartment (if fitted).
Appliance temperature adjustment:
The thermostat automatically adjusts the temperature inside the
refrigerator compartment.
The thermostat knob can be turned from position1 to 7 (coldest
setting) to make the internal temperature colder.
When set to O the appliance is switched off.
To store food for a short period of time, set the thermostat
between 1 (Min) and 3 (Med).
Note:
The ambient air temperature, frequency of door opening and the
position of the appliance can affect internal temperatures. These
factors must be taken into account when setting the thermostat.
How to use the refrigerator compartment
Position the food as shown in the figure.
A Cooked food
B Fish, meat
C Fruit and vegetables
D Bottles
E Cheese
Notes:
• The space between the shelves and the rear wall of the
refrigerator compartment must be unobstructed to allow
circulation of air.
• Do not place food in direct contact with the rear wall of the
refrigerator compartment.
• Do not place hot food in the refrigerator.
• Store liquids in closed containers.
Important
Storing vegetables with high water content can cause
condensation to form on the glass shelf of the crisper drawer:
this will not affect the correct operation of the appliance.
1. Top
2. Pull-out glass shelves
3. Glass panel
4. Crisper drawer
5. Leveling feet
6. Bottom door tray
7. Bottle holder
8. Inset handle
9. Light switch
10. Light
15