Whirlpool ART 315/L/ A+ Gebrauchsanweisung Seite 17

37055Aen.fm5 Page 17 Tuesday, July 27, 1999 6:31 PM
Before installation, make sure that the tubes on
the rear of the refrigerator have not been bent in
transit. If the tubes touch the refrigerator or the
wall, the refrigerator will be irritatingly noisy
during operation.
If necessary, bend them carefully to restore the
correct clearance.
The Mini-kitchen must be installed in a fixed and
plumb upright position. Any unevenness of the
floor can be accommodated by adjusting the feet
(Fig. 1).
Warm air must be free to escape
unobstructed at the rear of the refrigerator so
as not to affect operation (and not to cause
increased electrical power consumption).
Accordingly, the ventilation slots behind the
hotplates must not be covered.
The machine is approved only for free-
standing installation against a wall. Items of
furniture may be placed adjacently on either
side.
Fig. 1
INSTALLATION
TO ALIGN THE HEIGHT
OF THE DOORS, ADJUST
THE FRONT FEET.
17