Product Description And Specifications - Bosch RC 1 Professional Originalbetriebsanleitung

OBJ_BUCH-757-007.book Page 20 Tuesday, June 21, 2011 10:16 AM
20 | English
When using a class 3R measuring tool, observe possi-
ble national regulations. Non-observance of these regu-
lations can lead to injury.
Make sure that the area of laser radiation is monitored
or shielded. The limitation of laser radiation to controlled
areas prevents eye damage to persons not involved.
Battery Charger
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
Do not charge other batteries with the battery charger.
The battery charger is only suitable for charging the Bosch
battery/battery pack inserted in the rotational laser level.
Danger of fire and explosion when charging other batter-
ies/battery packs.
Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
Do not operate the battery charger on easily inflamma-
ble surfaces (e.g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
Under abusive conditions, liquid may be ejected from
the battery pack; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery may cause irritations or burns.
Supervise children. This will ensure that children do not
play with the charger.
Children or persons that owing to their physical, sensory
or mental limitations or to their lack of experience or
knowledge, are not capable of securely operating the
charger, may only use this charger under supervision or
after having been instructed by a responsible person.
Otherwise, there is danger of operating errors and injuries.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
1 619 929 J21 | (21.6.11)
Remote control
Read and observe all instructions. SAVE
THESE INSTRUCTIONS FOR FUTURE REFER-
ENCE.
Have the remote control repaired only through a quali-
fied repair person and only using identical replacement
parts. This will ensure that the functionality of the remote
control is maintained.
Do not operate the remote control in explosive atmos-
pheres, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the remote con-
trol which may ignite the dust or fumes.
Product Description and
Specifications
Intended Use
Rotational Laser Level
The measuring tool is intended for determining and checking
precise horizontal partitions, vertical lines, building lines and
plumb points.
The measuring tool is suitable for indoor and outdoor use.
Remote control
The remote control is intended for controlling rotational laser
levels in indoor and outdoor use.
Product Features
The numbering of the product features refers to the illustra-
tion of the rotational laser level, battery charger and remote
control on the graphics page.
Rotational laser level/Battery charger
1 Shock-warning indicator
2 Shock-warning button
3 Automatic levelling indicator
4 On/Off button of the rotational laser level
5 Button for rotational operation and selection of the
rotation speed
6 Variable laser beam
7 Reception lens for remote control
8 Exit opening for laser beam
9 Plumb beam
10 Rotation head
11 Button for line operation and line length selection
12 Charge-control indicator
13 Battery pack*
14 Battery compartment
15 Locking knob of the battery compartment
16 Locking knob of the battery pack*
17 Socket for charge connector*
18 Tripod mount 5/8"
19 Serial number of the rotational laser level
Bosch Power Tools