Memory Functions - Bosch PLR 25 Originalbetriebsanleitung

Continuous Measurement (Tracking) (see figure C)
The continuous measurement function (tracking) is used for
the transferring of measurements, e.g., from construction
plans. In continuous measurement mode, the measuring tool
can be moved relative to the target, whereby the measured val-
ue is updated approx. every 0.5 seconds. As an example, the
user can move from a wall to the required distance, while the
actual distance can be read continuously.
For continuous measurements, push button 12. The indicator for
continuous measurement (tracking) appears in the display
Pushing the measuring button 9 interrupts the continuous
measurement. The current measured value is indicated in the
display. Repeated pushing of the measuring button 9 starts the
continuous measuring again.
The continuous measurement automatically switches off after
5 minutes. The last measured value remains indicated on the dis-
play. The continuous measuring can also be ended by pushing
the buttons 6, 5 or 10 which changes the measuring function.
Deleting Measured Values
Briefly pressing button 1 deletes the last individual measuring
value determined in all measuring functions. Briefly pressing
the button repeatedly deletes the individual measured values
in reverse order.

Memory Functions

When switching off the measuring tool, the value in the memory
is retained.
Storing/Adding Measured Values
If a value is already stored in the memory, the new value is add-
ed to the memory contents, however, only when the measures
of unit correspond.
As an example, when an area value is in the memory and the
current measured value is a volume value, the addition cannot
take place. "Error" briefly flashes in the display.
Bosch Power Tools
Press the measuring button 9 to initiate
the measuring procedure. Move the meas-
uring tool until the required distance val-
ue is indicated at the bottom of the dis-
play.
Push the memory add button 4 in order to
store the current measured value – a
length, area or volume value, depending
on the current measuring function. As
soon as a value has been stored, "M" is
indicated in the display and the "+" be-
hind it briefly flashes.
English | 25
2 609 140 620 | (24.4.09)
.