Wilo DrainLift M2/8 Einbau- Und Betriebsanleitung Seite 34

English
Fig. 10: Suction pipe connection for the diaphragm hand pump
32
7.3.5 Drainage of cellars
To automatically drain the installation area of faeces lifting units, a pump sump is to be put
in place in accordance with ENb12056-4 (Fig. 11).
• Design pump (item 10) according to the delivery head of the unit. The dimensions of the
pit in the floor of the installation area should be at least 500 x 500 x 500 mm.
• By switching, a 3-way cock (item 11, accessories) allows both the tank to be manually drai-
ned as well as the pump sump using a diaphragm hand pump (Pos. 12).
2. Push the enclosed seal all the way in.
3. Bevel the suction pipe (outer Ø 50 mm) at the
suction end (approx. 30° to 45°) and push it
through the seal all the way to the floor using
a lubricant.
4. Make sure the seal has an exact fit. Secure
the suction pipe using clamps so that it
doesn't slip out of the tank opening.
WILO SE 02/2011