Assembly And Installation - Yamaha YZ450F Fahrer- Und Wartungshandbuch

SEAT, FUEL TANK AND SIDE COVERS
REMOVAL POINTS
Side cover
1. Remove:
• Bolt (side cover)
• Side cover (left) 1
• Side cover (right) 2
NOTE:
Draw the side cover downward to remove it
because its claws a are inserted in the air fil-
ter case.
Number plate
1. Remove:
• Bolt (number plate)
• Number plate 1
NOTE:
• The projection a is inserted into the band of
the number plate. Pull the band off the pro-
jection before removal.
• Remove the hot starter cable 2 and clutch
cable 3 from the cable guide b on the num-
ber plate.
• The projection c on the under bracket is
inserted into the number plate. Remove the
number plate by pulling it off the projection.

ASSEMBLY AND INSTALLATION

Air scoop
1. Install:
• Air scoop 1
• Bolt (air scoop)
NOTE:
Put the portion a of the flap of the air filter
case on the inside of the air scoop.
4 - 2
ENG
7 Nm (0.7 m · kg, 5.1 ft · lb)