Zibro P 122 Bedienungsanleitung Seite 58

a
b
c c
d
e
g
f
4
58
REMOTE CONTROL (ONLY FOR TYPE P125)
a. LCD Screen
b. Power on/off button
c. Timer and thermostat setting buttons
d. Mode button (select A/C, Fan or Dehumidifier)
e. A/C Fan Speed button (High, Medium, Low)
f. Timer ON / OFF button
g. Celsius / Fahrenheit selector
The remote control works in combination with the control panel. Aim the front
end of the remote control at the red window. The maximum operating distance
from the air conditioner is approximately 5 metres. Place AAA Batteries before
use.
TIMER PROGRAMMING
Press the button
1
control panel to turn on the Timer Function.
Press the or buttons on the remote or the
2
control panel to set the desired shut-off period.
The unit will shut off when the set time elapses.
3
DEHUMIDIFACATION OPERATION
Press the button on the remote or the MODE button on the control panel to
select the dehumidifier mode. When the dehumidifier mode is on, the tempera-
ture buttons and the fan speed buttons do not function and the fan will operate
on medium speed.
The dehumidifier indicator light will illuminate and stay solid while the unit is
dehumidifying. When the humidity in the room is 50% or lower, the compressor
will not run, the unit will not dehumidify, and the dehumidifier light will blink.
Remember, the exhaust hose does not need to be used in dehumidifier mode.
on the remote or the "Timer Setting" button on the
or buttons on the