General Information - Kärcher K 5 Full Control Bedienungsanleitung

Cleaning wall surfaces
Fasten the T-Racer directly to the high-pressure gun.
1 Press the bayonet connection of the T-Racer into
the connection of the high-pressure gun.
2 Turn it by 90° until it locks into place.
3 Tighten the union nut.
 Illustration
CAUTION
Always hold the T-Racer at the handle while cleaning
the walls.
 Adjust the twist grip "Power" in accordance with the
surface to be cleaned.
Control elements
The cleaning pressure is adjusted with the twist grip
Power via a bypass system.
Sturdy surfaces (e.g. tiles, concrete, stone)
 Illustration
Set turning handle "power" to "HARD".
For the effective cleaning of hard-to-remove con-
tamination.
Sensitive surfaces (e.g. wood)
 Illustration
Set turning handle "power" to "SOFT".
For the gentle cleaning of sensitive surfaces.
Troubleshooting
Pressure washer does not build up pressure or is
pulsating.
 Dismantle the high-pressure nozzles, check the
high-pressure nozzles for damage, rinse the T-
Racer with clean water then reinstall the high-pres-
sure nozzles.
Cleaning the high-pressure nozzle
 Illustration
a Remove the clip.
b Pull out the high-pressure nozzle.
c Insert the nozzle.
d Reinsert the clip.

General information

You can use the extension pipe with any Kärcher acces-
sory.
Use a moist cloth and clean the appliance after use.
Store the appliance in a frost free area.
The device can be suspended into the KÄRCHER or-
ganiser for storage.
Environmental protection
The packaging material can be recycled. Please
do not place the packaging into the ordinary re-
fuse for disposal, but arrange for the proper re-
cycling.
Old appliances contain valuable materials that
can be recycled. Please arrange for the proper
recycling of old appliances. Please dispose your
old appliances using appropriate collection sys-
tems.
Notes about the ingredients (REACH)
You will find current information about the ingredients
at:
www.kaercher.com/REACH
Use only original KÄRCHER spare parts. You will find a
list of spare parts at the end of these operating instruc-
tions.
The warranty terms published by the relevant sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is
caused by faulty material or defects in manufacturing. In
the event of a warranty claim please contact your dealer
or the nearest authorized Customer Service centre.
Please submit the proof of purchase.
– 2
EN
Tip
Care
Spare parts
Warranty
7