Maintenance And Service - Bosch GTS 10 XC Professional Originalbetriebsanleitung

OBJ_BUCH-1375-002.book Page 40 Monday, August 29, 2011 5:05 PM
40 | English
When transporting the power tool, only use the trans-
port fixtures. Never carry the power tool by the protec-
tive devices, the table extension 10 or the table width
enlargement 11.
The power tool should always be carried by two per-
sons in order to avoid back injuries.

Maintenance and Service

Maintenance and Cleaning
Before any work on the machine itself, pull the mains
plug.
If the machine should fail despite the care taken in manufac-
turing and testing procedures, repair should be carried out by
an after-sales service centre for Bosch power tools.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Cleaning
– For safe and proper working, always keep the power tool
and its ventilation slots clean.
– Remove dust and chips after each working procedure by
blowing out with compressed air or with a brush.
Power Tool Lubrication
Lubricants:
SAE 10/SAE 20 engine oil
– If required, open the bottom plate and apply oil to the lubri-
cation points of the power tool at the indicated locations.
(see figures S1–S2)
An authorized Bosch after-sales service agent will carry out
this work quickly and reliably.
Observe all applicable environmental regulations when
disposing of old grease and solvents.
Measures for Noise Reduction
Measures on behalf of the manufacturer:
– Soft starting
– Delivery of the machine with a saw blade developed partic-
ularly for noise reduction
Measures on behalf of the user:
– Low-vibration assembly on a firm working surface
– Use of saw blades with noise-reducing functions
– Regular cleaning of saw blade and power tool
1 619 929 K16 | (29.8.11)
Accessories
Dust bag
Extraction adapter
Y-adapter
Angle stop
Push stick
Saw stand GTA 60 W
Saw stand GTA 6000
Saw blades for wood and plate
materials, panels and strips/mouldings
Saw blade 254 x 30 mm, 40 teeth
Saw blade 254 x 30 mm, 60 teeth
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Article number
2 610 015 511
2 610 015 509
2 610 015 513
2 610 015 508
2 610 015 022
0 601 B12 000
0 601 B24 100
2 608 640 443
2 608 640 444
Bosch Power Tools