cecotec BOLERO SQUAD G 1200F GLASS BLACK Bedienungsanleitung Seite 80

ENGLISH
1. PARTS AND COMPONENTS
FIG. 1
1.- Operation knobs
2.- Burner and cap assembly
3.- Pan support
NOTE:
Figure 1 is a general graphical representation of all gas hob models included in this instruction
manual.
Each hob varies in the number and arrangement of burner(s) and operation knob(s).
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and
other packaging elements in a safe place to prevent damage to the appliance if you need
to transport it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Gas hob
- Accessories (burners, caps, pan supports, among others, depending on the model)
- Assembly kit (depending on the model)
- Instruction manual
3. INSTALLATION
- Installation must be carried out by a qualified technician.
- The technician must show you the location of the gas valve and how to close it in case of
emergency.
- Be sure to remove all packing material from the hob before putting it into operation to
avoid possible fires.
80
BOLERO SQUAD G 1200F / 2200F / 3200F / 4200F / 5200F GLASS BLACK