cecotec POWERGYRO 4000 LIGHT Bedienungsanleitung Seite 9

measures reduce the risk of the power tool starting up
accidentally.
Store idle electric tools out of the reach of children and
d)
do not allow people unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of inexperienced users.
Maintenance of power tools and accessories. Check if
e)
the moving parts are misaligned or stuck, if there are
broken pieces or any other condition that may affect
operating of the electric tool. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Cutting tools
f)
properly maintained and with sharp cutting edges are
less likely to jam and are easier to handle.
Use the electric tool, accessories and drill bits, etc.
g)
according to these instructions, taking into account
work conditions and the work to be carried out. Use of
the power tool for operations other than those intended
could result in a hazardous situation.
Keep handles and gripping surfaces dry, clean and free
h)
of oil and grease. Slippery gripping surfaces do not allow
safe handling and control of the tool in unexpected
situations.
5) Use and care of the batteries
Only recharge with the charger specified by the
a)
manufacturer. A charger suitable for one type of battery
may create a fire hazard if used with another type of
battery.
Use the power tool only with specifically designated
b)
battery packs. Use of any other type of battery may
create a risk of injury and fire.
16
PerfectSurface 180 Delta
When the battery is not in use, keep it away from other
c)
metal objects, such as paper clips, coins, keys, nails,
screws or other small metal objects, which can establish
a connection from one terminal to another. A short circuit
between the battery terminals can cause burns or fire.
Under harsh conditions, liquid may leak from the battery;
d)
avoid touching it. In case of accidental contact, rinse the
affected part with water. If the liquid comes into contact
with eyes, seek medical assistance immediately. Liquid
leaking from the battery can cause skin irritation and
burns.
Do not use a damaged or modified battery or tool.
e)
Damaged or modified batteries can show unpredictable
behaviours leading to fire, explosion or risk of injury.
Do not expose a battery or tool to fire or excessive
f)
temperatures. Exposition to fire and high temperatures
over 130 ºC could cause an explosion.
Follow all charging instructions and do not charge
g)
the battery or the tool outside the temperature range
specified in the instructions. Improper charging or
charging at temperatures outside the specified range
may damage the battery and increase the risk of fire.
6) Service
Have your power tool serviced by a qualified technician
a)
using only identical replacement parts. This ensures
that the power tool remains safe.
Never repair damaged batteries. Battery maintenance
b)
must only be carried out by the manufacturer or
authorised technician.
17
PerfectSurface 180 Delta