High-Pressure-Cleaning-Systems
2.4.2
Commissioning and operating the series KD 823, KD 1040 and KD 1140
WARNING
Figure 13
For commissioning and operating the series KD proceed as follows:
!
Device switch On/Off (2, figure 13) to position "0" (if required).
!
Connect AC power cable connector (4, figure 2) to facility AC power outlet.
!
Open the water supply shut off valve.
84
The High Pressure Cleaner jet must not be directed to persons,
animals or voltage supplied electrical equipment (machines,
devices, cables, electrical power outlets etc.).
Disconnect electrical equipment from power outlet, before
cleaning.
1
Trigger gun
2
Device switch
3
Unloader valve
High Pressure Cleaner KD 823, KD 1040 and KD 1140,
control elements