Sharp PN-655E Bedienungsanleitung Seite 15

Analogue connection with a PC (Input mode: ANALOG)
A PC image can be displayed using the PC analogue RGB input terminal.
• Connect to the display (analogue RGB) output terminal on your PC using a PC analogue signal
(RGB) cable (commercially available).
• Connect with an audio output terminal on your computer using a PC audio cable (commercially
available).
• Select the input mode "ANALOG" for this connection. (See page 22.)
• Use the automatic screen adjustment when you use this connection to display a PC screen for the
first time or when you change the setting of the PC. (See page 35.)
Output terminals on
connected equipment
Audio Display
• Auto-detects sync signal type.
• Sync signal presence is detected in this order: Composite sync, Horizontal/Vertical separate, and
Sync-on-green. If for some reason both Composite sync and Horizontal/Vertical separate are not input,
the system will operate assuming that the signal is a Sync-on-green (i.e. that the sync signal is
contained in the G signal of RGB). With some types of video signal, this may result in an unstable
image.
• See page 56 for compatible signal timing.
PC analogue signal (RGB) cable (commercially available)
PC audio cable (commercially available)
Rear view
PC audio input terminal
PC analogue
RGB input terminal
13
E