METREL MD 9030 Bedienungsanleitung Seite 16

MD 9030 TRMS Electrical & Electronic DMM with Temperature
Open Circuit Voltage : 0.4VDC typical
Capacitance
RANGE*
500.0nF, 5.000F,
50.00F, 500.0F,
3000F
*Additional 50.00nF range accuracy is not specified
**Accuracies with film capacitor or better
***Specified with battery voltage above 2.8V (approximately half full battery). Accuracy
decreases gradually to 12% at low battery warning voltage of approximately 2.4V
Hz Frequency
RANGE*
50.00Hz, 500.0Hz,
5.000kHz, 50.00kHz,
500.0kHz, 1.000MHz
*Additional 5.000Hz range accuracy & sensitivity are not specified
**Accuracy is specified at < 20VAC rms
Input Signal :
AC
Sensitivity :
10Hz--20Hz : > Sine 0.9Vrms;
20Hz--500kHz : > 2.6Vp; or Sine 1.9Vrms;
500kHz--1MHz : > 4.2Vp; or Sine 3Vrms
Update Rate : 2 per second nominal
Accuracy**
3.5%*** + 6d
Accuracy**
0.5%+4d
Square wave with duty cycle > 40% & < 70%; or Sine wave Vrms
16
Specification