Siemens SIMATIC ET 200S Kompaktbetriebsanleitung Seite 10

Electromagnetic Compatibility
The I/O system is intended for operation in the EMC environment class Industry.
Ensure an EMC-compliant design of your automation system as described in the
(
https://support.industry.siemens.com/cs/ww/en/view/109749242
NOTICE
Interference emission / Interference immunity
The operation of the I/O system can cause radio interference in residential areas.
If higher EMI is expected at the place of use than is intended for the industrial area according to EN61000-6-2, additional
measures are required (e.g. ESD, overvoltage protection).
ATEX-/UKEX device intended for use in hazardous area
If the product is intended for use in a potentially explosive atmosphere (gas/air or gas/dust mixture), observe the special
documentation (
information in the
(e.g. ATEX zone, degree of protection, temperature class) is indicated on the product (in the declaration of conformity and
usually also on the nameplate).
NOTE
As a rule, country-specific requirements for the operator also apply when a product is used in a potentially explosive
atmosphere (e.g. Directive 1999/92/EC for the EU).
Cleaning
If you need to clean the product, use dry ESD cleaning cloths (observing the protective measures for ESD).
Requirement: All supply voltages present on the device are switched off. Observe the five safety rules for working in and on
electrical installations.
Maintenance and repair
The product is maintenance-free. Repairs to the product may only be carried out by the manufacturer.
Recycling and disposal
For environmentally sustainable recycling and disposal of your electronic waste, contact a company certified for the disposal
of electronic waste. Dispose of the product in accordance with the applicable regulations in your country.
Accessories
You can find information on the approved accessories in the
(
https://support.industry.siemens.com/cs/ww/en/view/109749242
10
https://support.industry.siemens.com/cs/ww/en/view/109749242
documentation
documentation
)
for the I/O system.
)
.
)
. The intended use
Compact Operating Instructions
A5E51784858-AC, 06/2023