Consumption Values - Atag VA63111ST/A01 Benutzerinformation

20
Programme
P8
6)
1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. (This is the standard programme for test institutes).
2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the
temperature and quantity of the water, the energy consumption and the programme duration.
3) This programme has a high temperature rinsing phase for better hygiene results. During the rinsing phase, the
temperature stays at 70 °C for at least 10 minutes.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
5) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad
odours to come out from the appliance.
Do not use detergent with this programme.
6) This is the most silent programme. The pump works at a very low speed to decrease the level of noise. Because
of the low speed, the programme duration is long.

Consumption values

1)
Programme
P1
P2
P3
P4
P5
P6
P7
P8
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
Degree of soil
Type of load
Normal soil
Crockery and cutlery
Duration
(min)
195
40 - 150
150 - 160
70 - 80
55 - 65
30
14
200 - 220
Programme
phases
Prewash
Wash 50 °C
Rinses
Dry
Energy
(kWh)
0.92
0.6 - 1.4
1.4 - 1.6
0.7 - 0.9
1.0 - 1.2
0.9
0.1
1.1 - 1.2
Options
Multitab
Water
(l)
10.2
7 - 14
13 - 14
11 - 12
10 - 11
9
4
9 - 10