Ordering Replacement Parts; Disposal And Recycling - EINHELL RG-WW 1139 N Originalbetriebsanleitung

Anleitung_RG_WW_1139_N_SPK1:_
GB
figure 3.
Do not use abrasive cleaning agents or petrol to
clean the coarse filter and the non-return valve.
Clean the coarse filter and the non-return valve
by tapping them on a flat surface. In cases of
stubborn dirt, first clean with soapy water, then
rinse with clear water and air-dry.
Assemble in reverse order.
9.3 Storage
If the pump is not going to be used for a long
time or has to be removed for the winter
months, rinse it out with water, empty it
completely and allow it to dry.
The equipment must be completely drained
before it is subjected to frost.
After long stoppages, make sure the rotor turns
correctly by briefly switching the pump on and
off.

9.4 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
10. Storage
Store the equipment and accessories out of children's
reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is
between 5 and 30 °C. Store the electric tool in its
original packaging.

11. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
12
01.07.2010 13:36 Uhr Seite 12