Philips GC8300-Serie Bedienungsanleitung Seite 13

7 Empty the steam generator into the sink again.
8 Repeat steps 6 & 7 twice to obtain the best result.
9 Screw the Calc-Clean rinsing cap tightly back onto the steam
generator.
Calc-Clean light
1 The Calc-Clean light flashes for 30 seconds when it is time to rinse
the steam generator.
The steam generator does not heat up during these 30 seconds.
2 Switch off the appliance immediately and let it cool down.
Do not use the Calc-Clean function when the steam generator is hot.
3 Use the Calc-Clean function as described above.
Storage
Always let the appliance cool down before you store it.
1 Place the iron on the iron platform.
2 Empty the water tank.
3 Pull out the cord & hose storage hook.
4 Secure the supply hose and mains cord.
EnGliSh
13