WimTec SanTec VIVA Montage- Und Bedienungsanleitung Seite 28

EN
Function instruction
Cleaning stop function:
DIP Switch 3
The armature can be deactivated for example for cleaning the ceramic or the tap.
Dip Switch 3 ON = Cleaning stop is activated
Dip Switch 3 OFF = Cleaning stop is deactivated (pre-adjusted)
Activation
Via approaching the hand to
the infrared sensor (below
the temperature handle).
After approx. 3 s (as soon
as the water flow stops) the
cleaning stop is activated for
3 min.
SanTec VIVA / PUREA
28 Kitchen tap
VIVA / PUREA
Cleaning stop deactivation
For stopping the cleaning
stop preterm approach your
hand in front of the infrared
sensor again for 3 s (resp. till
the water flow starts)
The automatic function of the
armature will be active after
leaving the active area.
Werkseinstellung:
ON
ON
OFF
OFF
1 2 3 4 5 6
ON
ON
OFF
OFF
1 2 3 4 5 6
ON
ON
OFF
OFF
1 2 3 4 5 6
If the cleaning stop will not
ON
be deactivated manually, the
OFF
armature changes after
1 2 3 4 5 6
3 min after leaving the active
range in normal mode.
ON
OFF
1 2 3 4 5 6
At adjustment DIP switch 2 OFF
the cleaning stop can only be
activated within the first 3 s
after releasing the water flow.
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
!