Device Description; Usage; Cleaning And Maintenance - Beurer HC 35 Ocean Gebrauchsanweisung

3. DEVICE DESCRIPTION

Removable, rotatable professional nozzle
1
Air outlet opening
2
Removable guard
3
ON/OFF button
4
Cold air button (blue)
5
Warm air button (red)
6

4. USAGE

1. Wash hair as usual and then dry with a towel. Hairsprays contain flammable substances,
so do not use hairspray while using the hair dryer.
2. Stand on a dry, non-conductive surface and make sure your hands are dry.
3. To switch on the hair dryer, press the ON/OFF button
dium warm air setting and two red LEDs light up on the LED display
4. Use the warm air button
nated LED display
One red LED
Two red LEDs =
Three red
LEDs
5. Dry and/or style your hair as you wish.
6. Switch hair dryer off after each use/interruption. To switch off the hair dryer, press the
ON/OFF button
7. Remove the mains plug from the socket.
8. Allow the hair dryer to cool completely on a fireproof surface.

5. CLEANING AND MAINTENANCE

1. Disconnect the mains plug and leave the device to cool.
2. Remove and clean the guard as shown in figure
the guard at regular intervals.
or cold air button
6
shows the currently set level.
7
gentle air flow,
=
warm air
powerful air flow,
very warm air
very powerful air flow,
=
hot air
. The LEDs on the hair dryer go out.
4
LED display
7
Handle
8
Hanging loop
9
Anti-kink protection
10
Mains cable
11
. The hair dryer starts on the me-
4
to set your preferred level. The illumi-
5
One blue LED
Two blue LEDs
Three blue LEDs =
A
. To ensure a long service life, clean
12
.
7
gentle air flow,
=
cold air
powerful air flow,
=
cold air
very powerful air flow,
cold air